RC Case

I finished designing the case that will fit the silkopter RC system.

Here’s how it looks like:

 

Components:

  1. Raspberry Pi3
  2. Official Raspberry Pi 7″ touchscreen
  3. A 3 axis gimbal stick for the yaw/pitch/roll
  4. A ADS1115 ADC to sample the sticks and the throttle fader
  5. A motorized 10K fader for the throttle
  6. A brushed Pololu motor controller. Pololu modules are awesome btw
  7. 2 clickable rotary encoders to tune custom parameters like PIDS
  8. 2 switches to save/restore the custom parameters
  9. 7 push buttons to change flight modes, RTH and other cool things

 

The case is pretty big due to the screen. It’s 22.3 cm tall, 19.5 cm wide and 4.4 cm deep – so I couldn’t print it in one piece on my Prusa I3 printer. So I had to split in in a few pieces, print each one and them glue them together.

After a few failed prints, here’s the end result:

img_0742

 

 

I’m painting it now with matte black paint and tomorrow I will put all the components together.

The only problem I’m having now is that I broke my touchscreen while fitting it in the case so I need to order another one.

 

 

Advertisements

2 thoughts on “RC Case

    1. Thanks Cyprien. Didn’t end up as nice after painting, I really need to learn to watch a tutorial before starting something new – especially if there is no easy way to go back.
      The screen is not bright enough in direct sunlight so I had to chance the plan. Check my last post for details..

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s